FLAT4 TOP＞＞＞ FLAT4 Original VW Parts ＞＞＞ Body Parts -English-

FLAT4 original products are manufactured to answer your needs. All our products are produced with careful planning and high quality control to bring you the best of the best. Some of our items are reproduction of those parts that you can not find anymore or the rare item with difficult acquisition, etc. These reproduction series are made faithfully from the N.O.S. part and combining our experience to make it better or user friendly. Also, there are more item in FLAT4 original products line and you will see our original designed item specially made to your air cooled VW.
BD-220
Headlight eyebrows has been very popular factory accessory since 50's. However, nowadays it is hard to obtain and many aftermarket eyebrow in market today is hardly satisfy you with its quality. This time, FLAT4 is proud to introduce our own reproduction of high quality head light eyebrows. FLAT4 headlight eyebrow is triple chromed over brass with a rolled edge, just like original GERMAN happich made. You will see the difference between FLAT4 eyebrows and any other eyebrows on market today. FLAT4 eyebrow is easily installed just by putting between headlight lense and rim.
Parts Number
Products
BD-220
 FLAT4 HEADLIGHT EYEBROWS BRASS & CHROME ALL Pr.


One of the most popular VW optional parts in 50〜60's was the roof rack. FLAT4's original roof rack is available in both stainless steel and powder coated steel. For stainless steel roof rack, we use #304 and #404 stainless steel, so it will never rust or lost its shine. For steel made roof rack is very strong that it will hold the weight up to 50kg.
TYPE-2 roof rack looks different from other roof rack on the market. We made exactly as same as AMERICAN VW factory optional roof rack. This roof rack is also powder coated and it will hold the weight up to 75kg.
Finally, we also produced much anticipated roof rack for TYPE-3 SQ/BK. This TYPE-3 roof rack is also made by steel and it is powder coarted. This roof rack will hold the weight up to 50kg. Our roof racks are not just made for its looks but also to use it daily.
All the roof rack can be knock down for easy strage and shiping.
BD-790,791 BD-800 BD-805
FLAT4's original rear luggage racks are utilizing upper space of decklid of TYPE-1 to bear maximum 30kgs, which was one of VW factory optional parts from the '50s through '60s. FLAT4 reproduced it using rust-resisting zinc-coated H/D steel pipe and hard wood. It is fixed with slit under rear window and bumper bracket. The vintage rear luggage rack is available in two model; one is for TO-'67, it able to mount on both EUROPEAN and AMERICAN bumper except convertible and another model is for '68-ON square bumper to suit your nees.
Rear mount type ski carrier was one of VW factory optional parts form 50's through 60's, and it has been no longer in production for a long time. However, FLAT-4 reproduced the ski carrier in style of LIETZ of that time. Ski carrier itself is made with heavy duty triple chromed steel pipe, and it has leather straps on both side to tie up 2 set of skies.
BD-806 BD-809,809A
Parts Number
Products
BD-790
 FLAT4 VINTAGE ROOF RACK CARRIER FOR T-I
STAINLESS STEEL W.1120mm x L.870mm
BD-791
 FLAT4 VINTAGE ROOF RACK CARRIER FOR T-I
POWDER COATED W.1120mm x L.870mm
BD-800
 FLAT4 VINTAGE ROOF RACK CARRIER FOR T-II
POWDER COATED W.1300mm x L.980mm
BD-805
 FLAT4 VINTAGE ROOF RACK CARRIER FOR T-III
POWDER COATED W.1100mm x L.1260mm
BD-806
 FLAT4 VINTAGE SKI CARRIER SET FOR 2SET OF SKIES
T-I SEDAN ALL
BD-809
 FLAT4 VINTAGE REAR LUGGAGE RACK FOR T-I SEDAN TO-'67
BD-809A
 FLAT4 VINTAGE REAR LUGGAGE RACK FOR T-I SEDAN '68-ON


FLAT4 origianl hinge mirrors are made by #304 stainless steel, so the mirrors will never rust off. Driver side of right hand drive is oval shape. Mirror for passenger side can be used either right or left hand drive, and it has long neck with round shape mirror. These hinge mirrors will make it better visibility from your driver's seat.A Hinge mirror nat should use BD-715.
Since there was no TYPE-3 door mirror as high quality as genuin VW around the world today. FLAT4 decide to produce it to satisfy all the TYPE-3 enthusiast all over the world. FLAT4 produced left and right side mirror in style which was only available '64 throgh '67. These fully polished mirrors are made out of high quality #304 stainless steel and use flat lens for its good visibility. These mirrors can be mount on all TYPE-3 that has mounting threds on the door.
BD-706,707 BD-712 BD-715
T2-129 T2-129A,B
T3-028,029
Parts Number
Products
BD-706
 FLAT4 GENUINE VW STYLE HINGE MIRROR DRIVER SIDE L.H.D　Ea.
BD-707
 FLAT4 GENUINE VW STYLE HINGE MIRROR DRIVER SIDE R.H.D　Ea.
BD-712
 REPLACEMENT HINGE MIROR PASSENGER SIDE L OR R　Ea.
BD-715
 CHROME HINGE MIRROR NUT SET
T2-129
 FLAT4 VINTAGE ROUND SIDE VIEW MIRROR W/CRAMP φ104mm　T-II '50-'67 Ea.
T2-129A
 MIRROR ARM FOR T2-129 DRIVER SIDE　Ea.
T2-129B
 MIRROR ARM FOR T2-129 PASSENGER SIDE　Ea.
T3-028
 FLAT4 DOOR MIRROR LEFT FOR TYPE-III ALL　Ea.
T3-029
 FLAT4 DOOR MIRROR RIGHT FOR TYPE-III ALL　Ea.


This is the bumper guard rubber which was only available in europe in 60's, and now available from FLAT4. This is good item not only to protect your bumper but also to dress up your car.
This FLAT4 ROBRI style aluminum fender guards and running board protector is made of fully polished cast aluminum. These items are easily mounted with supplied stainless steel hardwares. These guards will protect your fenders and running boards from tips and dings.
BD-160
BD-645 BD-646 BD-647
Parts Number
Products
BD-160
 EUROPEAN BUMPER GUARD PROTECTOR RUBBER SET OF 4
BD-645
 ROBRI STYLE FRONT FENDER STONE GUARD Pr.
BD-646
 ROBRI STYLE REAR FENDER STONE GUARD Pr.
BD-647
 ROBRI STYLE RUNNING BOARD PROTECTOR Ea.


T3-006
TYPE-3 chrome bumper guard with protective rubber and bow kit was one of the popular accessory from VW factory in 60's. This accessory is so hard to find in good condition and so expensive today since it is high in demand among the Type-3 owner. To answer Type-3 owner's dream, FLAT4 made the exact replica of this chrome bumper guard & bow kit. This stylish accessory kit is available for front and for rear bumper and both come with all the hardware to mount on your '62-'69 bumper blade.
T3-007
Parts Number
Products
T3-006
 FLAT4 Chrome bumper guard & bow kit W/Hardware　FRONT
T-3 '62-'69
T3-007
 FLAT4 Chrome bumper guard & bow kit W/Hardware　REAR
T-3 '62-'69


You can buy FLAT4 products at...
PLEASE CONTUCT US >>> oversea@flat4.co.jp